2
Setting Up the Xcalibur Instrument Configuration
Specifying the Reagent Ion Source for the MS Detector
Specifying the Reagent Ion Source for the MS Detector
10
MS/ETD System Getting Started Guide
Specify the ETD module as the reagent ion source for the LTQ XL or LTQ Velos MS
detector.
To specify the reagent ion source
1. In the Thermo Foundation Instrument Configuration window, in the Configured
Devices list, double-click the LTQ XL MS or LTQ Velos MS icon to open the
Configuration dialog box
Figure 4.
LTQ XL Configuration dialog box
2. In the left pane, select Reagent Ion Source.
The reagent ion source configuration appears (for the LTQ Velos MS detector, see
Figure
5).
3. Select the Reagent Ion Source Configured check box.
You must manually select this check box for MS/ETD systems.
(Figure
4).
Thermo Scientific