Tuning; Opening The Tune Plus Window; Chapter 3 Tuning - Thermo Scientific ETD Getting Started Manual

For the ltq xl and ltq velos ms detectors (compatible with ltq orbitrap xl and ltq orbitrap velos)

Table of Contents

Tuning

Thermo Scientific

Tuning the optics in the reagent ion source provides settings for optimum transmission of

reagent ions (fluoranthene).

•

Tuning the Reagent Ion Optics

•

Viewing the Reagent Ion Optics Settings

•

Saving the ETD Tune Method

There are several methods for opening the Tune Plus window.



To open the Tune Plus window

Do one of the following to open the Tune Plus window

• On the Windows taskbar, choose Start > Programs > Thermo Instruments > LTQ >

Tune, where model is your specific MS/ETD system.

Note For LTQ Series version 2.5.0 or earlier, choose Start > Programs >

Xcalibur >

• In the Xcalibur application, choose Roadmap view > Instrument Setup >

(left pane) > Tune Plus.

• In the Xcalibur application, choose Roadmap view > Instrument Setup,

(menu toolbar) > Start Tune Plus.

Tune.

(Figure

7):

MS/ETD System Getting Started Guide

Table of Contents