Fcc Compliance Statement - Thermo Scientific ETD Getting Started Manual

LTQ Velos/ETD System (November 2008)
EMC Directive 2004/108/EEC
EMC compliance has been evaluated by TÜV Rheinland of North America, Inc.
EN 61326-1: 2006
EN 55011: 2007
EN 61000-3-2: 2006
EN 61000-3-3: 2005
EN 61000-4-2: 2001
EN 61000-4-3: 2006
Low Voltage Safety Compliance
This device complies with Low Voltage Directive 2006/95/EEC and harmonized standard EN 61010-1:2001.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAUTION Read and understand the various precautionary notes, signs, and symbols contained inside
this manual pertaining to the safe use and operation of this product before using the device.
For your safety, and in compliance with international regulations, the physical handling of this Thermo Fisher Scientific
instrument requires a team effort to lift and/or move the instrument. This instrument is too heavy and/or bulky for one
person alone to handle safely.

FCC Compliance Statement

Notice on Lifting and Handling of
Thermo Scientific Instruments
EN 61000-4-4: 2004
EN 61000-4-5: 2005
EN 61000-4-6: 2007
EN 61000-4-11: 2004
FCC Part 15: 2007