PHONE (front
RJ45 sockets. Used for connection of analog phones. Intended for two-wire analog phones. For
panel)
connection to 4-wire analog phones connection should be via a master socket with ringing capacitors.
If connected to an
Barrier Boxes
protective ground.
Protective Ground point. Use of a protective ground is required for all installations, see
(Earthing). Where the module is connected to analog extensions in another building, an IP Office Phone
Barrier Box V2 (101V) is required at both ends, see
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system.
Item
IPO 500 Phone
IEC60320 C13 Power Cord
IP Office 500Rack Mounting Kit
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not
include a locale specific power cord for the external PSU or any phone extension cables.
PARTNER® Version, Installation and Reference Manual
IP Office Essential Edition
out-of-building
extension, the connection must be made via additional
in addition to the buildings primary protection. The module must also be connected to a
Variant
16 Ports
CEE7/7
BS1363
NEMA5-15P
China
Lightning Protection/Out-of-Building
Country
Part number
All
700449507
Europe
700289762
United Kingdom
700289747
America
700289770
China
700261977
All
700429202
IP Office
Grounding
Connections.
Page 60
- Issue 1a (30 January 2010)
Need help?
Do you have a question about the IP Office Essential Edition PARTNER Version and is the answer not in the manual?