1MRK 505 208-UEN B
17.4.2
17.4.2.1
Technical reference manual
19" panel rack mounting
Overview
All IED sizes can be mounted in a standard 19" cubicle rack by using the for each
size suited mounting kit which consists of two mounting angles and fastening
screws for the angles.
Please note that the separately ordered rack mounting kit for side-by-
side mounted IEDs, or IEDs together with RHGS cases, is to be
selected so that the total size equals 19".
When mounting the mounting angles, be sure to use screws that
follows the recommended dimensions. Using screws with other
dimensions than the original may damage the PCBs inside the IED.
Section 17
IED hardware
671