Keypad - ABB Relion 670 Series Technical Reference Manual

Section 3
Local HMI
3.4
40

Keypad

The keypad is used to monitor and operate the IED. The keypad has the same look
and feel in all IEDs. LCD screens and other details may differ but the way the keys
function is identical.
IEC05000153 V1 EN
Figure 11: The HMI keypad.
Table 2 describes the HMI keys that are used to operate the IED.
Table 2: HMI keys on the front of the IED
Key Function
Press to close or energize a breaker or disconnector.
IEC05000101 V1 EN
Press to open a breaker or disconnector.
IEC05000102 V1 EN
Press to open two sub menus: Key operation and IED information.
IEC05000103 V1 EN
Press to clear entries, cancel commands or edit.
IEC05000104 V1 EN
Press to open the main menu and to move to the default screen.
IEC05000105 V1 EN
Press to set the IED in local or remote control mode.
IEC05000106 V1 EN
Press to open the reset screen.
IEC05000107 V1 EN
Press to start the editing mode and confirm setting changes, when in editing mode.
IEC05000108 V1 EN
Table continues on next page
1MRK 505 208-UEN B
Technical reference manual