Mounting Procedure For 19" Panel Rack Mounting - ABB REG670 Technical Manual

1MRK502052-UEN B
21.4.2.2
Technical manual

Mounting procedure for 19" panel rack mounting

2
1a
IEC08000160 V3 EN
Figure 557: 19" panel rack mounting details
The required torque for the screws is 3.5 Nm.
Pos Description
1a Mounting angles, which can be mounted, either to the
left or right side of the case.
2 Screw
3 Washer
Section 21
IED hardware
3
1a
IEC08000160-3-en.vsdx
Quantity Type
2 -
8 M4x6
8 M4x6
1209