Setting The Number Of Modules (Network Type) - Mitsubishi Electric Melsec QJ71LP21 Reference Manual

5 PARAMETER SETTINGS

5.1 Setting the Number of Modules (Network Type)

MNET/H mode (Control station)
MNET/H mode (Normal station)
MNET/10 mode (Control station)
1
MNET/10 mode (Normal station)
1
MNET/H mode Stand by station
MNET/H EX (Control station)
MNET/H EX (Normal station)
1: The QJ71NT11B does not support MESECNE/10 mode.
5 - 7
Set the network type and the station type for each module.
Up to four modules can be set for a combination of MELSECNET/H and CC-Link IE
Controller Network.
Note that, however, there are restrictions on the number of modules mounted for one
programmable controller CPU depending on the CPU model used. (Refer to the user's
manual for the CPU module used.)
For the MELSECNET/H network system, select control station, normal station, or
standby station.
(1) Selection type
Select from the following items:
Item
Set this item for a control station of the MELSECNET/H mode.
Set this item for a normal station of the MELSECNET/H mode.
Set this item for a control station of the MELSECNET/10 mode.
Set this item for a normal station of the MELSECNET/10 mode.
Set this item for a standby station of a simplified redundant
system.
Set this item for a control station of the MELSECNET/H
Extended mode.
Set this item for a normal station of the MELSECNET/H
Extended mode.
MELSEC-Q
Description
5 - 7