Mitsubishi Electric Melsec QJ71LP21 Reference Manual page 231

7 APPLICATION FUNCTIONS
Make sure to set
the transfer to
within the host's
(control station)
send range.
Click the
Transfer from
Transfer to
7 - 7
(2) Interlink transmission parameters
When transferring data to other network, up to 64 transfer ranges can be set
between the network modules. Note that, when data from a given device range is
transferred to multiple network numbers, as many setting ranges must be set as
the number of transfer to networks.
[Setting example]
Module 1 (0 to 3F
H
Module 2 (1100
H
MNET/H (control station)
module 1
LB
0
to
FF
100 to 15F
100
to
1FF
button.
Module1: MNET/H mode (Control station)
Module1: MNET/H mode (Control station)
) Module 2 (1000
H
to 115F ) Module 1 (100
H
MNET/H (normal station)
module 2
0 to 3F
1000 to 103F
1100 to 115F
Transfer to Module2: MNET/H mode (Normal station)
Transfer from Module2: MNET/H mode (Normal station)
to 103F )
H H
to 15F )
H H
LB
0
Make sure to set
the transfer to
within the host's
1000
(normal station)
send range.
to
10FF
1100
to
11FF
MELSEC-Q
7 - 7