Mitsubishi Electric Melsec QJ71LP21 Reference Manual page 283

7 APPLICATION FUNCTIONS
Applicable device
Setting
Internal device
data
Bit Word
(S1)
(S2)
(D1)
(D2)
(D3)
1: T, C, D, W, ST, SD, or SW can be used.
For SD/SW, data can be written within the setting range allowed for the user.
For details of SD/SW, refer to the manual for the programmable controller CPU or network module of the target station.
7 - 59
2) JP/GP.WRITE and JP/GP.SWRITE
These instructions are used to write data to devices of a
programmable controller on another station. (In units of words)
With the SWRITE instruction, a device on another station turns on
when data writing is completed. (The other station can recognize that
data have been written with the SWRITE instruction.)
Link direct device
File register J \
Bit
1
Applicable device
Intelligent function
module device
Word U \G
MELSEC-Q
Index register Constant
Zn K, H, $
Others
7 - 59