Siemens SINUMERIK 840D sl Function Manual page 43

03/2013
Function
Last month
Last 3 months
Last 6 months
Last year
Back to previous zoom
Time-based distribution
Equal distribution
1000 values
5000 values
All values
Delete markings
List of machines and time series with control elements
Fig. 2-25: Displaying/hiding individual measurement series
Function
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
2.2 Variable monitors – time Series – measurements and measurement series
Description
Selects a display area. When the display area is
changed, the diagram is regenerated to reflect this;
however, all of the other settings (in particular, the
markings) remain the same.
The following time stamps can be selected:
•
•
•
•
Generates the diagram with the previous zoom
setting.
The horizontal axis represents a time axis. The
measuring points are plotted along this according to
their date.
The measured values are distributed equally along
the X axis; it is not possible to draw any further
conclusions about the time of the measurement
from the points on the X axis.
Shows 1000 relevant filtered values from the
database.
Shows 5000 relevant filtered values from the
database.
Shows all relevant filtered values from the
database.
The marks are removed from the diagram.
Description
This function removes the measurement series graph from the
diagram. The diagram is redrawn, which involves recalculating the
scale.
This function plots the limit values of the selected measurement
series in a line in the diagram. If the limit values are outside the range
of values displayed, an icon indicating this will appear.
Last month
Last 3 months
Last 6 months
Last year
2 Machine information
2-43