Siemens SINUMERIK 840D sl Function Manual page 197

03/2013
Function
Rules for
copying
Cancel
Copy
Fig. 3-80: Copying to several machines
Function
Source machine
Current target
machine
User
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
see also: Selecting a machine.
This informational menu indicates the rules
used for copying and presents important
information for cases in which copying is not
possible.
Returns to the previous menu from which the
copy function was accessed.
The copy function is not carried out.
The copying process is started.
The menu changes to a status display for the
current copy process.
Description
The source machine for the copying process is
indicated during the entire operation.
If only one target machine is selected, it is
displayed here corresponding to the target
machine.
If multiple target machines are selected, they are
displayed as a list in a separate field.
The user who was logged on to
SINUMERIK Integrate at the time the copying
process was started is displayed here.
3 Setting up functions
3.6 Copy
Type
DISPLAY
ACTION
ACTION
DISPLAY
Type
DISPLAY
DISPLAY
DISPLAY
3-197