Siemens SINUMERIK 840D sl Function Manual page 281

03/2013
6.1.4 Editing the master data of a machine
"Master data" tab
Fig. 6-6: Editing the master data of a machine
Function description
To make it easier to handle machines that have recently been created, the fields
within the machine's "Master data" menu appear with their most recently entered
contents. This prevents identical or similar entries from being reentered
unnecessarily. Generally speaking, no distinction is made in these entries between
upper- and lower-case letters.
Function
Machine ID
(mandatory)
Internal name
Company
Location
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Name of the machine in the user's
organization. This machine name must
be unique within an organization.
Freely selectable, additional name of the
machine can be the name used by the
end user (inventory number) or type
designation.
Name of the end user: Machines can be
selected in the machine tree according to
the end user.
Specifies the location of the machine:
Machines can be selected in the machine
tree according to their location.
6 Administration
6.1 Management of the organization
Type
DISPLAY
INPUT
(Max. 40 characters;
return, backspace,
°, $, §, \, ;, >, <, ß,
ä, ö, ü, Ä, Ö, Ü,´, €
are not permitted)
DISPLAY
INPUT
(max. 40 characters,
all characters are
permissible)
DISPLAY
INPUT
(Max. 40 characters,
return, backspace,
°, $, \, ;, >, <, are
not permissible.)
DISPLAY
INPUT
(Max. 40 characters,
return, backspace,
°, $, \, ;, >, <, are
not permissible.)
6-281