Siemens SINUMERIK 840D sl Function Manual page 198

3 Setting up functions
3.6 Copy
Function
Progress
Already copied
Still to be
copied
Error
Copied
function settings
Target machines
Machine ID
Notes
Status
Ready
3-198
Description
The copying process can take several hours to
complete if a large number of machines has
been selected as the target. The progress bar
shows an estimation of the completed copying
process as a percentage value.
Data is copied to the machines in sequential
order. All configurations included in the selection
are always copied in their entirety one after the
other to each machine. This makes it possible to
indicate how many machines already have all
complete copies.
The number of copies remaining is displayed as
the difference to the 'already copied' machines.
If one or more errors occur during copying, the
error display is incremented by one for each
machine.
Information about the errors is displayed
separately.
Errors are usually caused by an unsuitable
selection of the source and target machines
(number of axes, SIMATIC/SINUMERIK, etc.).
Irrespective of any errors that occur, everything
that is technically and logically appropriate and
correct is copied correctly.
All configurations selected for copying are listed,
just as in the selection, in a window with a scroll
bar.
All selected target machines are listed.
Specific information about the copying process
is displayed to provide instructions for manual
editing of the copied configurations or repetition
with other settings.
The current status of the copying process is
"OK" after complete, correct execution. If an
error occurred, this remains indicated in the
status.
A copying process in progress and a copying
process that has not yet performed are marked
accordingly in the status.
When the copying process has taken place, the
copy log is complete and can be acknowledged
with "Done". To protect against unintentional
acknowledgment, an additional prompt must be
confirmed. The information in the copy log is no
longer available after this acknowledgment.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
ACTION