Siemens SINUMERIK 840D sl Function Manual page 97

03/2013
Function
Triggered by control monitor
Control
monitor
Variables x – y of y
Variables
Edit variable
Time series
Name
Warning limit
Critical limit
Edit variable
Save
Cancel
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Selection of a control monitor that is to trigger the
variable monitor.
Creation of a new control monitor that is to trigger
the variable monitor.
Table of the variables configured in the variable
monitor.
Change to a window to record and insert the
following variable:
• Predefined NC variables
or
• Freely definable variable of PLC, NC, S7, S5,
etc.
Note:
An appropriate OPC driver or GenTec adapter is
required for freely definable variables. For more
information, contact your Siemens sales
representative.
Displays the time series of the selected variables.
Name of the variable.
Displays the configured values for the warning
limits.
Displays the configured values for the critical limit.
Activates the limit value of type upper limit.
Activates the limit value of type lower limit.
Displays the time series of the variable as
diagram.
Deletes the variable from the configuration of the
variable monitor.
Changes to the variable editing window to
• Select
• Add
• Delete
• Change
Saves the changes to the configuration and
returns to the calling page.
Discards the changes to the configuration and
returns to the calling page.
3 Setting up functions
3.1 Maintenance
Type
DISPLAY
SELECTION
DISPLAY
ACTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
ACTION
ACTION
ACTION
ACTION
ACTION
ACTION
ACTION
3-97