Siemens SINUMERIK 840D sl Function Manual page 218

4 Organizational tasks
4.1 Maintenance
Options
Submenus are available as an option if axis tests are connected to the
maintenance job.
The axis tests (axis test type and name) which have been connected to the
maintenance job while the maintenance schedule was being created are displayed.
The details indicate:
•
That an axis test has been performed, as well as whether this was
successfully completed and interpretable results produced
•
The date on which the axis test was performed. A date is not entered if the
maintenance job has been acknowledged without an axis test having been
performed.
•
The (consecutive) number of each axis test counted (axis test type and name)
A date is not entered if the maintenance job has been acknowledged without
an axis test having been performed.
•
The axis, along with its name (neither axis index nor channel axis index), and
the parameters of the axis test in NC syntax format.
Another optional view is available for combinations of axis tests (several axis tests
compiled in a test procedure - test series):
•
Here, the number of axis tests is displayed, as well as whether the axis tests
yielded interpretable results.
•
The date on which the axis tests were performed. If the maintenance job has
been acknowledged without the axis tests being performed, a date is not
entered.
•
The NC channel in which the axes are configured for the axis test
•
The number of axis tests configured in this combination The types of axis test
configured, as well as how many are included in this combined axis test
Once axis tests have been performed, their results can be viewed from this point in
a submenu.
Function
Open (axis
test)
Notice
In the case of maintenance procedures that include axis tests, it is highly
recommended that the status of the maintenance job be set to "open" while the
axis test is being performed. Otherwise, this may result in faulty axis tests if a
third party accesses the configurations.
4-218
Description
Axis test data recorded for a maintenance job is
displayed along with its test parameters, and can be
viewed in the associated data series.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
DISPLAY