Siemens SINUMERIK 840D sl Function Manual page 96

3 Setting up functions
3.1 Maintenance
The variable monitor can be configured as follows:
Function
Settings
Name
Symbol and
text
Comment
Delete
values
Active
Delete
values after
Maximum
number of
values per
variable
Last
measure-
ment
3-96
Description
Name of the variable monitor
Selection of an icon stored in the system and
naming the icon selected.
Notice:
The text entered applies to the entire machine and
overwrites any existing text.
Individual text for the variable monitor.
The values in the specified time period are only
deleted after you have selected "active".
Values are not deleted if "active" is not selected.
Automatically deletes all values after the specified
time.
The following units are available for the time
specification:
• Days
• Weeks
In addition to a time limit for the number of values,
a quantitative limit can be entered. When the
maximum number of desired values has been
reached, the oldest values are deleted. Thus the
limit is observed.
Time stamp of last data acquisition.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
DISPLAY
INPUT
(max. 195
characters,
all characters
are
permissible)
DISPLAY
SELECTION
INPUT
(max. 200
characters,
all characters
are
permissible)
DISPLAY
INPUT
(max. 200
characters,
all characters
are
permissible)
SELECTION
DISPLAY
SELECTION
INPUT
1 to 999,999
DISPLAY
INPUT
0 to
1,000,000
DISPLAY