Sealing Envelopes - Pitney Bowes SendPro C Operator's Manual

Sealing envelopes

This procedure describes how to seal envelopes whether you are printing postage on the envelopes or
only sealing the envelopes (no postage).
1. Check the level of sealant in the moistener tank and add more if required.
2. When feeding an envelope, be sure to slide the envelope flap under the edge of the feed deck, so
the moistener can wet the flap.
Note: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the
moistener brush and wick.
Pitney Bowes Operator Guide August 2019
Using Envelope Printing
103