Gvrp Port Configuration - Optical Systems Design OSD2512 User Manual

GVRP PORT CONFIGURATION


Configuration GVRP
This page allows you to enable or disable a port for GVRP operation.
This configuration can be performed either before or after GVRP is configured
globally - the protocol operation will be the same.
Port
The logical port that is to be configured
Mode
Mode can be either 'Disabled' or 'GVRP enabled'. These values turn the GVRP feature off or
on respectively for the port in question.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved
values
PAGE 251
OPTICAL SYSTEMS DESIGN

Port config
.
OSD2512 OPERATOR MANUAL
DOC ID: 10118101