Optical Systems Design OSD2512 User Manual page 358

Mode
Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It
can be either Include or Exclude.
Source Address
IP Address of the source.
Currently, the maximum number of IPv6 source address for filtering (per group) is 8.
When there is no any source filtering address, the text "None" is shown in the Source Address
field.
Type
Indicates the Type. It can be either Allow or Deny.
Hardware Filter/Switch
Indicates whether data plane destined to the specific group address from the source IPv6
address could be handled by chip or not.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
: Refreshes the displayed table starting from the input fields
: Updates the table starting from the first entry in the MLD SFM Table
: Updates the table, starting with the entry after the last entry currently
displayed
PAGE 358
OPTICAL SYSTEMS DESIGN
OSD2512 OPERATOR MANUAL
DOC ID: 10118101