Optical Systems Design OSD2512 User Manual page 204

IP SUBNET-BASED VLAN MEMBERSHIP CONFIGURATION

Configuration VCL
The IP subnet to VLAN ID mappings can be configured here. This page allows
adding, updating and deleting IP subnet to VLAN ID mapping entries and assigning
them to different ports.
Delete
To delete a mapping, check this box and press save. The entry will be deleted in the stack.
IP Address
Indicates the subnet's IP address (Any of the subnet's host addresses can be also provided here,
the application will convert it automatically).
Mask Length
Indicates the subnet's mask length.
VLAN ID
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a unique
matching.
Port Members
A row of check boxes for each port is displayed for each IP subnet to VLAN ID mapping
entry. To include a port in a mapping, simply check the box. To remove or exclude the port
from the mapping, make sure the box is unchecked. By default, no ports are members and all
boxes are unchecked.
Adding a New IP subnet-based VLAN
Click
added to the table, and the mapping can be configured as needed. Any IP address/mask can be
configured for the mapping. Legal values for the VLAN ID are 1 to 4095.
The IP subnet to VLAN ID mapping entry is enabled when you click on "Save". The
button can be used to undo the addition of new mappings. The maximum possible IP subnet to
VLAN ID mappings are limited to 128.
PAGE 204
OPTICAL SYSTEMS DESIGN

IP Subnet-based VLAN
to add a new IP subnet to VLAN ID mapping entry. An empty row is
OSD2512 OPERATOR MANUAL
DOC ID: 10118101