9.6
SAVE CONFIGURATION TO START-UP
In the treemap below, expand the Maintenance
Click Save Configuration to save the configuration on start-up.
9.7
PORT SPEED SETTING
The default port speed settings for the OSD2790SFP is 1Gbps. If the user uses 100Mbps SFP devices,
the unit will have to have those ports manually set to 100Mbps for correct operation. In the tree map
below expand the Configuration menu and select Ports. Select Port number then in the Speed
Configured column from the drop down menu select the 100Mbps option. Click Save to save setting.
PAGE 16
OSD2790SFP QUICK START GUIDE
OPTICAL SYSTEMS DESIGN
Configuration, then select Save startup-config.
DOC ID: 10117502