Port Allocation - Optical Systems Design OSD2251P Series Operator's Manual

1.3

PORT ALLOCATION

Front Panel: There are two fixed copper ports for 10/100/1000Base-T and two SFP ports.
Top Panel: The top panel consists of a 4-way 5.08mm terminal block power connector and a 4-way
3.5mm terminal block alarm connector.
Bottom Panel: 8-Way DIP switch, Mini USB connector and a Type-B USB connector.
Each section will be described further throughout this manual.
Power LED
RJ45 Port x 2
Front Panel
SFP Port x 2
Top Panel
Dual Power Port
Bottom Panel
Config Switches
PAGE 8
OPTICAL SYSTEMS DESIGN
FIGURE 2: PORT ALLOCATION
OSD2251P OPERATOR MANUAL
Ring LED
Activity LED x2
PoE LED x 2
Link LED x 2
Alarm Port
Earth Screw
Console Port
Prog Port
DOC ID: 10115304