Optical Systems Design OSD2512 User Manual page 255

UDLD PORT CONFIGURATION

Configuration UDLD
This page allows the user to inspect the current UDLD configurations, and possibly
change them as well.
Port
Port number of the switch.
UDLD Mode
Configures the UDLD mode on a port. Valid values are Disable, Normal and
Aggressive. Default mode is Disable.

Disable
In disabled mode, UDLD functionality doesn't exists on port.

Normal
In normal mode, if the link state of the port was determined to be unidirectional, it will not
affect the port state.
PAGE 255
OPTICAL SYSTEMS DESIGN
OSD2512 OPERATOR MANUAL
DOC ID: 10118101