Optical Systems Design OSD2512 User Manual page 78

Community Configuration

Configuration Security
Configure SNMPv3 community table on this page. The entry index key is
Community.
Delete
Check to delete the entry. It will be deleted during the next save.
Community
Indicates the community access string to permit access to SNMPv3 agent. The allowed string
length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. The community
string will be treated as security name and map a SNMPv1 or SNMPv2c community string.
Source IP
Indicates the SNMP access source address. A particular range of source addresses can be used
to restrict source subnet when combined with source mask.
Source Mask
Indicates the SNMP access source address mask.
Buttons
: Click to add a new access management entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved
values.
PAGE 78
OPTICAL SYSTEMS DESIGN
 
Switch SNMP
OSD2512 OPERATOR MANUAL

Communities
DOC ID: 10118101