Optical Systems Design OSD2512 User Manual page 193

Default
To set the switch port to use the default VLAN Translation Group click the checkbox and
press Save.
Group ID
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This
way a port is configured to use a number of VLAN Translation mappings easily by simply
configuring it to use a given group. Then number of possible groups in a switch is equal to the
number of ports present in this switch. A port can be configured to use any of the groups, but
only one at any given time. Multiple ports can be configured to use the same group. A valid
Group ID is an integer value from 1 to 14.
Note: By default, each port is set to use the group with Group ID equal to the port number.
For example, port #1 is by default set to use group with GID = 1.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
: Click to save changes.
: Refreshes the displayed table starting from the input fields.
PAGE 193
OPTICAL SYSTEMS DESIGN
OSD2512 OPERATOR MANUAL
DOC ID: 10118101