Optical Systems Design OSD2512 User Manual page 65

Managed 12 x 10/100/1000base-t rj45 and 2 x 1g sfp ethernet switch
Hide thumbs Also See for OSD2512:
Table of Contents

Advertisement

This page provides an overview of the privilege levels.
Group Name
The name identifying the privilege group. In most cases, a privilege level group consists of a
single module (e.g. LACP, RSTP or QoS), but a few of them contains more than one. The
following description defines these privilege level groups in details:
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based
and the MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP source guard.
IP: Everything except 'ping'.
Port: Everything except 'VeriPHY'.
Diagnostics: 'ping' and 'VeriPHY'.
Maintenance: CLI- System Reboot, System Restore Default, System Password, Configuration
Save, Configuration Load and Firmware Load. Web- Users, Privilege Levels and everything
in Maintenance.
Debug: Only present in CLI.
Privilege Levels
Every group has an authorization Privilege level for the following sub groups: configuration
read-only, configuration/execute read-write, status/statistics read-only, status/statistics read-
write (e.g. for clearing of statistics). User Privilege should be same or greater than the
authorization Privilege level to have the access to that group.
Notes that some web pages (for example, MPLS-TP and MEP BFD pages) are based on JSON
to transmit dynamic data between the web server and application. These pages require the
configuration Read/Write privilege of JSON_RPC group before any operations. This
requirement must be met first, then it will evaluate the current privilege level against the
required privilege level for the given method. For example, assumes the MPLS-TP page only
allows Read-Only attribute under privilege level 5, the privilege configuration should be set as
JSON_RPC:[5,5,5,5] and MPLS_TP:[5,10,5,10].
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved
values.
PAGE 65
OPTICAL SYSTEMS DESIGN
OSD2512 OPERATOR MANUAL
DOC ID: 10118101

Advertisement

Table of Contents
loading

Table of Contents