Optical Systems Design OSD2512 User Manual page 242

on a destination port where a network analyzer can be attached to analyze the network
traffic.
Remote Mirroring is an extend function of Mirroring. It can extend the destination
port in other switch. So the administrator can analyze the network traffic on the other
switches.
If you want to get the tagged mirrored traffic, you have to set VLAN egress tagging as
"Tag All" on the reflector port. On the other hand, if you want to get untagged
mirrored traffic, you have to set VLAN egress tagging as "Untag ALL" on the
reflector port.
SESSION
Select session id to configure.
MODE
To Enabled/Disabled the mirror or Remote Mirroring function.
TYPE
Select switch type.
Mirror
The switch is running on mirror mode.
The source port(s) and destination port are located on this switch.
Source
The switch is a source node for monitor flow.
The source port(s), reflector port and intermediate port(s) are located on this switch.
Intermediate
The switch is a forwarding node for monitor flow and the switch is an option node.
The object is to forward traffic from source switch to destination switch.
The intermediate ports are located on this switch.
Destination
The switch is an end node for monitor flow.
The destination port(s) and intermediate port(s) are located on this switch.
VLAN ID
The VLAN ID points out where the monitor packet will copy to. The default VLAN
ID is 200.
PAGE 242
OPTICAL SYSTEMS DESIGN
OSD2512 OPERATOR MANUAL
DOC ID: 10118101