Optical Systems Design OSD2512 User Manual page 112

VLAN Mode Configuration

Configuration Security
This page provides ARP Inspection related configuration.
NAVIGATING THE VLAN CONFIGURATION
Each page shows up to 9999 entries from the VLAN table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN
Table. Clicking the
or the closest next VLAN Table match. The
currently displayed VLAN entry as a basis for the next lookup. When the end is
reached the warning message is shown in the displayed table. Use the
start over.
VLAN Mode Configuration
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the port setting
on Port mode configuration web page. Only when both Global Mode and Port Mode on a
given port are enabled, ARP Inspection is enabled on this given port. Second, you can specify
which VLAN will be inspected on VLAN mode configuration web page. The log type also
can be configured on per VLAN setting.
Possible types are:
None: Log nothing.
Deny: Log denied entries.
Permit: Log permitted entries.
ALL: Log all entries.
PAGE 112
OPTICAL SYSTEMS DESIGN
 
Network
button will update the displayed table starting from that
OSD2512 OPERATOR MANUAL

ARP Inspection VLAN Configuration
will use the next entry of the
button to
DOC ID: 10118101