Osd2254P Port Allocation - Optical Systems Design OSD2254P Series Operator's Manual

1.3

OSD2254P PORT ALLOCATION

Front Panel: There are four fixed copper ports for 10/100/1000Base-T and two SFP ports.
Top Panel: The top panel consists of a 4-way 5.08mm terminal block power connector and a 4way
3.5mm terminal block alarm connector.
Bottom Panel: 8-Way DIP switch, Micro USB connector and a Type-B USB connector.
Each section will be described further throughout this manual.
Front Panel
Top Panel
Bottom Panel
PAGE 8
OPTICAL SYSTEMS DESIGN
FIGURE 2: OSD2254P PORT ALLOCATION
OSD2254P OPERATOR MANUAL
Copper Port 1
Copper Port 2
Copper Port 3
Copper Port 4
SFP Port 5
SFP Port 6
Power Port
Alarm Port
Configuration Port
Micro USB Port
Console Port
DOC ID: 10115206