GREEN ETHERNET
FAN CONFIGURATION
Configuration
Green Ethernet
This page allows the user to inspect and configure the current settings for controlling
the fan. If the system contains multiple temperature sensor the highest temperature is
used for controlling the fan
Max Temperature
The temperature at which the fan will be to set to run at full speed. The value accepted is
within the range of -127 to 127.
On Temperature
The temperature at which the fan will be turn on (at the lowest possible fan speed). The value
accepted is within the range of -127 to 127.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved
values.
PAGE 43
OPTICAL SYSTEMS DESIGN
Fan
OSD2512 OPERATOR MANUAL
DOC ID: 10118101