Optical Systems Design OSD2512 User Manual page 62

SECURITY
SWITCH
Users Configuration

Configuration Security
This page provides an overview of the current users. Currently the only way to login
as another user on the web server is to close and reopen the browser.
The displayed values for each user are:
User Name
The name identifying the user. This is also a link to Add/Edit User.
Privilege Level
The privilege level of the user. The allowed range is 0 to 15. If the privilege level value is 15,
it can access all groups, i.e. that is granted the fully control of the device. But others value
need to refer to each group privilege level. User's privilege should be same or greater than the
group privilege level to have the access of that group. By default setting, most groups
privilege level 5 has the read-only access and privilege level 10 has the read-write access. And
the system maintenance (software upload, factory defaults and etc.) need user privilege level
PAGE 62
OPTICAL SYSTEMS DESIGN
 
Switch Users
OSD2512 OPERATOR MANUAL
DOC ID: 10118101