Optical Systems Design OSD2512 User Manual page 120

TACACS+ Server Configuration

Configuration Security
This page allows you to configure the TACACS+ servers.
GLOBAL CONFIGURATION
These setting are common for all of the TACACS+ servers.
Timeout
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
TACACS+ server before it is considered to be dead.
Deadtime
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period during
which the switch will not send new requests to a server that has failed to respond to a previous
request. This will stop the switch from continually trying to contact a server that it has already
determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if more
than one server has been configured.
Key
The secret key - up to 63 characters long - shared between the TACACS+ server and the
switch.
SERVER CONFIGURATION
The table has one row for each TACACS+ server and a number of columns, which are:
PAGE 120
OPTICAL SYSTEMS DESIGN
 
AAA TACACS+
OSD2512 OPERATOR MANUAL
DOC ID: 10118101