Enable Syslog; Disable Syslog - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Index Time
-------- ------------------------------
1 03-Jan-2000 17:48:21 %AAA-I-CONNECT: User CLI session for user admin over
telnet , source 10.6.150.34 destination 10.6.41.37 ACCEPTED
2 03-Jan-2000 17:48:02 %AAA-I-DISCONNECT: User CLI session for user admin o
ver telnet , source 10.6.150.34 destination 10.6.41.37 TERMINATED. The Telnet/
SSH session may still be connected.
3 03-Jan-2000 17:38:46 %AAA-I-DISCONNECT: User CLI session for user admin o
ver console , source 0.0.0.0 destination 0.0.0.0 TERMINATED. The Telnet/SSH se
ssion may still be connected.
4 03-Jan-2000 17:26:24 %COPY-W-TRAP: The copy operation was completed succe
ssfully
5 03-Jan-2000 17:26:17 %COPY-I-FILECPY: Files Copy - source URL running-con
fig destination URL flash://startup-config
6 03-Jan-2000 17:25:40 %AAA-I-CONNECT: User CLI session for user admin over
telnet , source 10.6.150.34 destination 10.6.41.37 ACCEPTED
DGS3100#

enable syslog

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the syslog function on the Switch:

disable syslog

Purpose
Syntax
59
-----------------------------------
To enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to a
remote host.
None.
Only Administrator or operator-level users can issue this command.
DGS3100# enable syslog
Success.
DGS3100#
To disable the system log from being sent to a remote host.
disable syslog
Log Text