Korg Krome Parameter Manual page 371

messages will be transmitted by each track whose Status
is BTH, EXT, or EX2. For more information, please see "8–
3b: Insert Effect" on page 149.
Controlling effects
Effect control 1 (CC#12) [Bn, 0C, vv]
Effect control 2 (CC#13) [Bn, 0D, vv]
When the above CC# is assigned to the Assignable Pedal or
knobs 1–4 when the Realtime Controls USER is selected,
operating that controller will transmit Effect Control 1/2
messages, and the specified dynamic modulation will be
controlled. When this message is received, the result will be
the same as when the controller is operated.
Although various types of control change can be selected as
dynamic modulation sources, Effect Control 1 (CC#12) and 2
(CC#13) are dedicated for dynamic modulation.
Effect 1 depth (Send 2) (CC#91) [Bn, 5B, vv]
Effect 3 depth (Send 1) (CC#93) [Bn, 5D, vv]
When the above CC# is assigned to the Assignable Pedal or
Realtime Controls knobs 1–4, operating that controller will
transmit Effect 1 Depth (Send 2) or Effect 3 Depth (Send 1)
messages, and the send level 1 or 2 to the master effects
MFX1 or MFX2 will be controlled respectively. When this
message is received, the result will be the same as when the
controller is operated.
On the corresponding MIDI channels, this will
simultaneously control the timbre/track setting as well as
the setting following the Insert Effect.
• In Combination, and Sequencer modes, the actual send
level of the timbre/track is determined by multiplying this
value with the send 1/2 settings for each oscillator (Prog
8–1d). (See "Send 1 (MFX1)," "Send 2 (MFX2)" on
page 96, Global P1: MIDI "Track MIDI Out" on page 200)
• When you adjust Send 1 (MFX1) or Send 2 (MFX2)
(Sequencer 8–1b) in Sequencer mode, or when you re‐
select a song or return to the beginning of the measure in
Sequencer mode, Send 1/2 will be transmitted by each
track whose Status is BTH, EXT, or EX2. (See "Send1
(MFX1)" on page 148).
Effect 2 depth (IFX1–5 on/off) (CC#92) [Bn, 5C, vv]
Effect 4 depth (MFX1, 2 on/off) (CC#94) [Bn, 5E, vv]
Effect 5 depth (TFX on/off) (CC#95) [Bn, 5F, vv]
Separately from the effect on/off settings in each mode,
Effect Global SW (Global 0–1b) allows you to turn off insert
effects IFX1–5 and master effects MFX1, 2 and total effect
TFX. Master effects MFX1/2 and the total effect TFX can also
be turned off using the front panel MASTER FX button and
TOTAL FX button.
If you uncheck Enable IFX1–5, Enable MFX1&2 or Enable
TFX, the corresponding message will be transmitted with
vv=0 [00]. If you check these settings, the corresponding
message will be transmitted with vv=127 [7F]. If you
uncheck these settings, the corresponding effect(s) will be
turned off as a group. If you check these settings, the on/off
settings of each mode will be used. The same applies to
reception. (vv of 00 is off, and 01 or greater is the original
setting.) These messages are transmitted/received on the
global MIDI channel. ("IFX 1–5 on/off" ‐ "MFX 1, 2 on/off" ‐
"TFX on/off" on page 59, page 61)
Note: These messages are defined simply for use in
adjusting the effect levels, and may not have the same
function on another instrument connected to the KROME.
Using various controllers
Here we will explain typical ways to use the various
controllers. You can choose from MIDI CC#00–CC#119 for
knobs 1–4 when the Realtime Controls USER is selected.
Foot controller (CC#04) [Bn, 04, vv]
If the above CC# is assigned as the Assignable Pedal
function, this message will be transmitted when the
controller is operated.
• In Combination and Sequencer modes, transmission/
reception of this message can be turned on/off
independently for each timbre/track (Enable Foot Pedal/
Switch Combi/Seq 5–1(2)c).
Controller (CC#18) [Bn, 12, vv]
This message will be transmitted when the KROME's
VALUE dial is operated.
This is valid in Program Select (Prog 0–1a) and
Combination Select (Combi 0–1(2)a) when the program or
combination number/name is selected (highlighted).
Knob modulation USER [1], USER [2], USER [3], USER [4]
(CC#17, 19, 20, 21)
[Bn, 11, vv], [Bn, 13, vv], [Bn, 14, vv], [Bn, 15, vv]
If the above CC# are assigned to the knobs 1–4 when the
Realtime Controls USER mode is selected, these messages
will be transmitted when the knobs are operated.
• In Combination and Sequencer modes, transmission/
reception of this message can be turned on/off
independently for each timbre/track (Enable Realtime
Controls Knob UER [1], USER [2], USER [3], USER [4]
Combi 5–7(8)c/Seq 5–7(8)c).
Controller (CC#83) [Bn, 53, vv]
If you assign the above CC# to a knobs 1–4 when the
Realtime Controls USER mode is selected, this message will
be transmitted when you operate the corresponding
controller of the KROME.
Damper pedal (CC#64) [Bn, 40, vv]
This message is transmitted when you operate a damper
pedal (optional DS‐1H) connected to the DAMPER jack, and
the damper effect will be turned on/off. If the DS‐1H is used,
a half‐damper effect can be applied.
• In Combination and Sequencer modes, transmission/
reception of this message can be turned on/off
independently for each timbre/track (Enable Damper
Combi/Seq 5–1(2)c).
SW1 modulation (CC#80) [Bn, 50, vv]
SW2 modulation (CC#81) [Bn, 51, vv]
If the above CC# are assigned as the function of SW1 or
SW2, operating the switch will transmit this message with
vv=127 [7F] for ON, and vv=00 [00] for OFF.
• In Combination and Sequencer modes, transmission/
reception of these messages can be turned on/off
independently for each timbre/track (Enable SW1, Enable
SW2 Combi/Seq 5–9(10)c)
Foot switch (CC#82) [Bn, 52, vv]
If the above CC# is assigned as the function of the
ASSIGNABLE SWITCH, operating the switch will transmit
this message with vv=127 [7F] for ON, and vv=00 [00] for
OFF.
• In Combination and Sequencer modes, transmission/
reception of this message can be turned on/off
independently for each timbre/track ("Enable Foot
Switch" Combi/Seq 5–9(10)c).
Sostenuto (CC#66) [Bn, 42, vv]
If the above CC# is assigned as the function of the
ASSIGNABLE SWITCH, operating the switch will transmit
this message with vv=127 [7F] for ON, and vv=00 [00] for
MIDI applications
363