Global P3: Scales; 3-1: Scales - Korg Krome Parameter Manual

Global P3: Scales

3–1: Scales
3–1a
3–1b
Here, you can make settings for sixteen different User
Octave Scales and one User All Notes Scale.
The user scales you create here can be selected from the
following pages.
• Prog P1: Basic/Controllers– Note‐on/Scale
• Combi P3: Timbre Param– Scale T01–08/T09–16
• Seq P3: Track Param– Scale T01–08/T09–16
Note: To edit a scale, use the Program mode page listed
above to select the scale that you want to edit, and then
move to this page.
Note: The key can also be selected by holding down the
ENTER button and playing a note. Alternatively, you can
press the Keyboard Lock button and play a note to select the
key. Select the scale that you want to edit.
Note: By executing the Copy Scale menu command, you can
copy the settings of a preset scale (other than Stretch) or of
another user scale, and then edit the settings of the copied
scale.
If you wish to keep an edited user scale after the power
is turned off, be sure to write (save) your settings.
Press the page menu or the WRITE button to access the
Write Global Setting menu command and save your
settings.
3–1a: User Octave Scale
User Octave Scale [User Octave Scale 00...15]
Selects the User Octave Scale that you want to edit.
Tune
Makes pitch settings for each note in the octave.
When you adjust the pitch of each note in the octave (C–B)
in one‐cent steps, your settings will be applied to all octaves.
This adjustment is relative to equal temperament.
A setting of –99 lowers the pitch approximately a semitone
below normal pitch.
A setting of +99 raises the pitch approximately a semitone
above normal pitch.
3–1b: User All Notes Scale
Tune
3–1
Makes independent pitch settings for each of the 128 notes.
Menu
Adjust the pitch of each of the 128 notes (C–1 – G9) in one‐
cent steps. This adjustment is relative to equal temperament.
A setting of –99 lowers the pitch approximately a semitone
below normal pitch.
A setting of +99 raises the pitch approximately a semitone
above normal pitch.
Use the horizontal scroll bar to move to the key range that
you want to set, and select the key that you want to specify.
Keyboard Lock
Keyboard Lock
If this is On, you can use the KROME's keyboard to select
keys of the scale. Select the key for User Octave Scale or User
All Notes Scale, and then use the keyboard to make your
selection.
3–1: Menu Command
V
• 0: Write Global Setting
• 1: Copy Scale
For more information, please see "Global: Menu Command"
on page 216.
[–99...+99]
Global P3: Scales 3–1: Scales
[–99...+99]
see p. 216
see p. 220
[Off, On]
203