Korg Krome Parameter Manual page 223

Delete
Deletes the selected region.
Data to the right of the selected region will move toward the
left to fill the gap.
If the with step parameters option is selected, the step
parameter values will also move.
<<, >>
Cycles the tones within the selected region.
If the with step parameters option is selected, the step
parameter values will also be cycled.
with step parameters
If this option is selected, the step parameters will also be
affected when you execute the Space, Delete, <<, or >>
commands.
Copy Tools
Local:
Copy
Copies the selected region to the copy buffer.
Cut
Copies the selected region to the copy buffer, and then
deletes it.
Paste
This command is available if there is data in the copy buffer.
Specify a region, and then paste (overwrite) the data from
the copy buffer.
If the w/ step param (with step parameter) option is
selected, the step parameter values will also be pasted.
The data from the copy buffer will be pasted so that the
lower left point of the region specified when copying will be
at the lower left point of the region you specify before
executing the Paste command.
w/step parameters (with step parameters)
If this option is selected, the step parameters will also be
copied when you execute the Paste command.
limit by selected
If this option is selected, the data from the copy buffer will
be pasted only to the extent of the region you specify before
executing the Paste command.
If this option is cleared, all of the data from the copy buffer
will be pasted.
Example) Moving the tones of the first and second beats
1. In "Select an area," specify the area as 11/00 (vertical) –
01/16 (horizontal), and then press the Cut button.
2. Specify the area as 11/01 (vertical) – 01/16 (horizontal),
and then press the Paste button.
Global P6: Arpeggio Pattern Tool Tablet
The first half will move upward.
External:
Here you can copy the settings of a different user arpeggio
pattern.
By using limit by selected, you can create patchwork edits
that are more sophisticated than simply using Copy
Arpeggio Pattern.
(Copy From)
Selects the copy‐source arpeggio pattern.
* This function is not available if the copy‐source arpeggio
pattern is the same as the currently‐edited pattern.
limit by selected
If this option is selected, only the specified region of the
copy‐source arpeggio pattern will be copied.
If this option is cleared, the entire pattern will be copied just
as when using Copy Arpeggio Pattern.
Print
Inserts the selected arpeggio pattern.
6–1: Menu Command
V
• 0: Write Arpeggio Patterns
• 1: Rename Arpeggio Pattern
• 2: Copy Arpeggio Pattern
For more information, please see "Global: Menu Command"
on page 216.
see p. 221
see p. 221
see p. 221
215