Korg Krome Parameter Manual page 192

Sequencer mode
Erase Exclusive Data
This command erases (deletes) universal system exclusive
messages or KROME parameter change messages from the
specified region.
1. Use Track Select to specify the MIDI track from which
you want to erase exclusive data.
2. Choose Erase Excl Data to open the dialog box.
3. Specify the region from which you want to erase uni-
versal system exclusive messages or KROME parameter
change messages.
Note: Use From Measure and To Measure to specify the
measures, and Beat.Tick to specify the beat and clock. (By
default, From Measure and To Measure will be set to the
region you specified in the Track Edit page.)
4. Use Kind to specify the type of universal system exclu-
sive message or KROME parameter change message
that you want to erase.
For more information, please see "Universal system
exclusive" on page 365.
5. Press the OK button to execute the Erase Exclusive Data
operation. If you decide not to execute, press the Cancel
button.
If you want to erase all universal system exclusive messages
or KROME parameter change messages from specified
measures in a single operation, you can use Erase Measure
with Kind set to Exclusive; however in that case, you won't
be able to use Beat.Tick when specifying the range for
erasure.
Copy Insert Effect
Copy Insert Effect is available on all of the IFX pages.
For more information, please see "Copy Insert Effect" on
page 66.
However, the MIDI control channel specified in Ctrl Ch of
the IFX 1–5 page will not be copied.
Swap Insert Effect
Swap Insert Effect is available on all of the IFX pages.
For more information, please see "Swap Insert Effect" on
page 67.
However, the MIDI control channel specified in Ctrl Ch of
the IFX 1–5 page will not be swapped.
DrumKit IFX Patch
For more information, please see "DrumKit IFX Patch" on
page 104.
184
Copy MFX/TFX
Copy MFX/TFX is available on all of the MFX/TFX/LFO
pages.
For more information, please see "Copy MFX/TFX" on
page 67.
However, the MIDI control channel specified in Ctrl Ch of
the MFX 1–TFX page will not be copied.
Swap MFX/TFX
Swap MFX/TFX is available on all of the MFX/TFX/LFO
pages.
For more information, please see "Swap MFX/TFX" on
page 67.
However, the MIDI control channel specified in Ctrl Ch of
the MFX 1–TFX page will not be swapped.
Write FX Preset
Write FX Preset is available on all of the effects parameter
editing pages, including IFX 1–5, MFX 1 and 2, and TFX.
For more information, please see "Write FX Preset" on
page 67.
Put Effect Setting to Track
Put Effect Setting to Track is available on all of the IFX and
MFX/TFX/LFO pages.
This command inserts effect settings into a track as exclusive
events. You can use this to make the effect settings change
during a song.
When you use System Exclusive messages to change
effect settings, a certain amount of time will be required
for the effect to switch. Also, if a note is playing, the
sound may not change smoothly. You should take into
account the timing of the musical data when choosing
where to insert System Exclusive messages .
Note: If you switch effects during a song, you should also
use this command to insert an effect change at the beginning
of the track (Measure 001, Beat.Tick 01.000) to select the
effect that will be used from the beginning.
1. Use P8: Routing/IFX or P9: MFX/TFX/LFO to edit the
effect settings that you want to insert (IFX1–IFX5,
MFX1, MFX2, TFX), and determine the song, track, mea-
sure, beat, and clock at which you will insert the exclu-
sive event.
The illustration below shows the example of switching IFX4
(used by track 2) at the beginning of measure 9.
2. Select "Put Effect Setting to Track" to open the dialog
box. (The values in the dialog box are settings for the
example described in step 1.)