Korg Krome Parameter Manual page 242

Media mode
5. If you wish to copy the file or directory with a different
name, use the text edit button (in the lower field) to
access the text input dialog box, and specify the new
name for the file or directory to be copied.
If you're using wildcards to copy multiple files
simultaneously, you won't be able to change file names.
Note: If you decide not to copy, press the Abort button.
Delete
Delete is available on the Utility tab.
This command deletes the selected file or directory.
This command is valid only if a DOS file or directory is
selected.
1. Select the file or directory that you want to delete.
2. Select "Delete" to open the dialog box.
3. Delete will indicate the name of the selected file or
directory.
If you wish to change the file or directory that is to be
deleted, use the text edit button to access the text input
dialog box, and specify the name of the file or directory that
you wish to delete. (See OG page 117)
Using [*/? ]as a Wildcard: When you use the text edit button
to access the text input dialog box and specify the name of
the file to be deleted, you can use the "*" or "?" characters as
wildcards. This allows you to simultaneously delete
multiple files with identical filenames and different
extensions, or files whose names are partially identical (see
"Copy" on page 233).
When wildcards are used, only files will be subject to
deletion. Directories will not be deleted.
Create Directory
Create Directory is available on the Utility tab.
This command creates a new directory within the current
directory.
Use the text edit button to access the text input dialog box,
and specify the name of the new directory (See OG
page 117).
Set Date/Time
Set Date/Time is available on the Utility tab.
This is the date and time at which the file was saved.
The KROME does not contain an internal calendar or
clock, you must use Utility menu command Set Date/
Time to set the date and time before saving the file.
234
Year 1980–2079
Month 1–12
Day 1–31
Hour 0–23
Minute 0–59
Second 0–59
Format
Format is available on the Utility tab.
This command formats the media that's inserted in the
KROME. The volume label (a name for the entire media)
you specify will be assigned to the media. The volume label
you assign here will be displayed in the SD Card (Media 0–
1a). The volume label can be a maximum of eleven
characters.
After formatting, it is not possible to press the
COMPARE button to undo formatting.
1. Make sure that the media you want to format is
inserted.
2. Select "Format" to open the dialog box.
3. In Volume Label, use the text edit button to access the
text input dialog box, and specify the volume label (See
OG page 117).
The previously‐specified volume label will be displayed. If
no volume label had been specified for the media, or if a
non‐DOS media was inserted, this will indicate NEW
VOLUME.
4. Specify the initialization format.
Quick Format: Normally you should use Quick Format to
initialize the media.
Full Format: All blocks in the media will be erased.
Normally there is no need for you to execute Full Format.
You should execute Quick Format instead.