028: Mic Model+Preamp (Mic Modeling + Preamp) - Korg Krome Parameter Manual

Hide thumbs Also See for Krome:
Table of Contents

Advertisement

Overdrive, Amp models, and Mic models (OD Amp Mic) 028: Mic Model+PreAmp (Mic Modeling + PreAmp)
028: Mic Model+PreAmp (Mic
Modeling + PreAmp)
This effect simulates a mic and vacuum tube preamp. You
can choose from various types of mic and positions to create
differing sonic characters.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Mic Simulation
Right
Vintage
Dynamic,
Multi
Condenser,
Percussion
Condenser,
a
Mic Type
Drums Dynamic,
Selects the type of mic
Vocal Dynamic,
Multi Dynamic,
Vocal
Condenser,
Vocal Tube,
Kick Dynamic
Close, On, Off,
Sets the mic placement distance
b Mic Position
Far
p.267
Tube Low Cut
Thru,
Sets the frequency of the low cut
[Hz]
21...8.00k
filter
c
53...20.00k,
Sets the frequency of the high
High Cut [Hz]
Thru
cut filter
Tube Gain
Sets the input gain to the
–24.0...+24.0
[dB]
vacuum tube preamp
d
Saturation
Sets the input/output response
0...100
[%]
of the preamp
Sets the bias level of the preamp
e
Tube Bias
0...100
p.266
Tube Output
Sets the output level of the
f
–48.0...+0.0
Level [dB]
preamp
Dry, 1 : 99...
Sets the balance between the
Wet/Dry
99 : 1, Wet
effect and the dry input
Selects a modulation source for
g
Src
Off...Tempo
Wet/Dry
Sets the modulation amount for
Amt
–100...+100
Wet/Dry
b: Mic Position
This expresses the effect that the mic position has on the
sound. The Close setting is the closest mic position, and the
Far setting is the farthest.
Wet / Dry
Tube Pre Amp
Output Level
Wet / Dry
p.266
267

Advertisement

Table of Contents
loading

Table of Contents