Korg Krome Parameter Manual page 112

Combination mode
Copy Insert Effect
Copy Insert Effect is available on all of the IFX pages.
This command copies effects settings from Program,
Combination, or Song. For more information, please see
"Copy Insert Effect" on page 66.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P8: Routing/IFX– IFX1–5 pages, will not be
copied.
Swap Insert Effect
Swap Insert Effect is available on all of the IFX pages.
This command swaps (exchanges) insert effect settings. For
more information, please see "Swap Insert Effect" on
page 67.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P8: Routing/IFX– IFX1–5 pages, will not be
swapped.
DrumKit IFX Patch
This patches the Bus (IFX/Output) Select settings for each
key of a drum kit, temporarily changing the insert effect
connection destinations.
You can execute this command if the program assigned to
the timbre is a drum program and Bus (IFX/Output) Select
is set to DKit. The Bus (IFX/Output) Select setting (Global
5–5b) of each key in the drum kit must be set to one of IFX1–
5.
1. In the Routing1 page or Routing2 page, select the tim-
bre for which you want to make settings. (Select a tim-
bre parameter or Timbre Number.)
2. Select "DrumKit IFX Patch" to open the dialog box.
3. In the DrumKit "IFX" popup, select the output bus to
which you want to patch the signal: an insert effect or
L/R or Off.
Note: To restore the condition of the drum kit, execute
IFX1→IFX1, IFX2→IFX2, IFX3→IFX3, IFX4→IFX4,
IFX5→IFX5 (see page 95).
Copy MFX/TFX
Copy MFX/TFX is available on all of the MFX/TFX/LFO
pages.
This command copies effect settings from Program,
Combination, or Song. For more information, please see
"Copy MFX/TFX" on page 67.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P9: MFX/TFX/LFO– MFX1 and TFX page,
will not be copied.
104
Swap MFX/TFX
Swap MFX/TFX is available on all of the MFX/TFX/LFO
pages.
This command swaps (exchanges) insert effect settings. For
more information, please see "Swap MFX/TFX" on page 67.
Note: The slot's MIDI control channel, as specified by the Ch
parameter on the P9: MFX/TFX/LFO– MFX1 and TFX page,
will not be copied.
Write FX Preset
Write FX Preset is available on all of the effects parameter
editing pages, including IFX 1–5, MFX 1 and 2, and TFX.
This command saves the edited effect into the KROME's
internal memory.
For more information, please see "Write FX Preset" on
page 67.