0-3: Mixer & Drum Track - Korg Krome Parameter Manual

0–1d: Effect
IFX 1, 2, 3, 4, 5
MFX 1, 2
TFX
Here you can view the effects that are assigned to the insert
effects, master effects, and total effect.
For the master effects you can adjust the send amounts.
The MASTER FX and TOTAL FX buttons respectively turn
master effects 1/2 and the total effect on/off (see Global).
Changing the Enable MFX1&2 and Enable TFX
settings will respectively transmit the control change
messages CC#94 (effect control 4) or CC#95 (effect
control 5). The transmitted value will be 0 for off, and
127 for on.
0–1e: Velocity Meter
This meter shows the note‐on velocity value.
• This indicates the note‐on velocity values on the global
MIDI channel, produced by the keyboard, MIDI IN, or
arpeggiator. (If multiple note‐on messages are received
simultaneously, the highest velocity will be displayed.)
• The meter will respond even if Key Zone or Vel Zone
settings are set so that the note does not actually sound.
• This meter indicates the note‐on velocity value; it does not
respond to changes in the Volume knob setting, nor to
changes in the level of the audio signal produced by the
Filter, Amp, EG, LFO, EQ, or effects.
0–1: Menu Command
V
• 0: Write Program see p. 64
• 1: Exclusive Solo see p. 64
• 2: Auto Song Setup see p. 65
For more information, please see "Program: Menu
Command" on page 64.
0–3: Mixer & Drum Track
0–1a
[000...127]
0–3a
0–3a: OSC/DrumTrack Mixer
Here, you can adjust the volume and change the Play/Mute
and Solo On/Off settings of oscillators 1 and 2 and the drum
track.
OSC Play/Mute:
OSC1 Play/Mute
Play: Oscillator 1 will sound.
Mute: Oscillator 1 will be muted (silent).
OSC2 Play/Mute
Play: Oscillator 2 will sound.
Mute: Oscillator 2 will be muted (silent).
Note: OSC2 Play/Mute cannot be set for a program whose
Oscillator Mode is Single or Drums.
DRUM Track Play/Mute 1
Play: The drum track will sound.
Mute: The drum track will be muted (silent).
OSC Solo:
OSC1 Solo
Switches the Solo status on/off for oscillator 1.
OSC2 Solo
Switches the Solo status on/off for oscillator 2.
DRUM Track Solo
Switches the Solo status on/off for the drum track.
Note: Solo applies to oscillators 1 and 2, the drum track.
Note: OSC2 Solo cannot be set for a program whose
Oscillator Mode is Single or Drums.
Note: The Solo On/Off setting is not saved when you write
the program.
Exclusive Solo
The menu's Exclusive Solo parameter also affects the way
that Solo works. If Exclusive Solo is off (unchecked),
Multiple Solos will be active, allowing you to turn Solo on/
off for more than one of the items: oscillators 1 and 2, and
the drum track. Each time you press a Solo button, the solo
setting will toggle on and off.
If Exclusive Solo is on (checked), only one of the applicable
items can be soloed. In this mode, pressing a Solo button
automatically disables any previous solos.
Tip: You can also toggle Exclusive Solo by holding ENTER
and pressing 2 on the numeric keypad.
PROG P0: Play 0–3: Mixer & Drum Track
0–3
Menu
0–3b
[Play, Mute]
[Play, Mute]
[Play, Mute]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
5