Combi P9: Mfx/Tfx/Lfo; Lfo); 9-1: Routing; 9-2: Mfx1 - Korg Krome Parameter Manual

COMBI P9: MFX/TFX/LFO (Master/Total Effect/LFO)
Here, you can make settings for the master effects and the
total effect. For instance, you can:
• Route a sound to the master effects and the total effect
• Make detailed settings for master effects and total effect
For more information, please see "Effect Guide" on
page 235.
9–1: Routing
9–1a
9–1b
9–1c
• Here you can specify the type of master effects 1, 2 and
total effect, and turn them on/off.
• The master effects are sent to the L/R bus. The total effect
is inserted into the L/R bus.
These parameters are the same as in Program mode. For
more information, please see "9–1: Routing" on page 61.
9–1a: Combination Name
These are the bank, number, and name of the current
Combination. For more information, please see "0–1(2)a:
Combination Select" on page 70.
9–1b: MFX1, 2
MFX1:
MFX1
MFX1 On/Off
Return 1
MFX2:
MFX2
MFX2 On/Off
Return 2
Chain:
Chain On/Off
Chain Direction [MFX1→MFX2, MFX2→MFX1]
Chain Level
For more information, please see "9–2: MFX1" on page 62.
COMBI P9: MFX/TFX/LFO (Master/Total Effect/LFO) 9–1: Routing
9–1c: TFX
TFX:
TFX
TFX On/Off
For more information, please see "PROG P9: MFX/TFX/LFO
(Master/Total Effect/LFO)" on page 61.
9–1d: Master Volume
9–1
Menu
Master Volume
For more information, please see "9–1c: Master Volume" on
page 62.
9–1: Menu Command
V
• 0: Write Combination
9–1d
• 1: Exclusive Solo
• 2: Auto Setup Song
• 3: Copy MFX/TFX
• 4: Swap MFX/TFX
For more information, please see "Combination: Menu
Command" on page 101.
9–2: MFX1
9–2a
[000...193]
[Off, On]
Here, you can edit the parameters of the effect you selected
[000...127]
for MFX1 in the P9: MFX/TFX/LFO– Routing page.
9–2a: MFX1
[000...171]
MFX1 On/Off
[Off, On]
This turns master effect 1 on/off. This is linked with the on/
[000...127]
off setting in the P9: MFX/TFX/LFO– Routing page.
Ch (Control Channel)
Specifies the MIDI channel that will control dynamic
[Off, On]
modulation (Dmod) for the master effect.
Ch01...Ch16: The specified MIDI channel will be used for
[000...127]
control.
G ch: The global MIDI Channel (Global 1–1a) will be used
for control. Normally you will use the G ch setting.
P (Effect Preset)
With Effect Presets, you can easily store and recall all of the
settings for an individual effect. You can store up to 16 user
presets for each effect type, in addition to 15 re‐writable
factory presets.
see p. 101
see p. 64
see p. 101
see p. 67
see p. 67
[Ch01...16, G ch]
[P00, P01...15, U00...15, ---------------]
[000...171]
[Off, On]
[000...127]
9–2
Menu
[Off, On]
99