3-7: Scale T01-08, 3-8: Scale T09-16 - Korg Krome Parameter Manual

Bend Range
Specifies the maximum amount of pitch change (in
semitones) that will occur when the pitch bender is
operated.
PRG: The pitch range specified by the program will be used.
–24...+24: This setting will be used regardless of the setting
in the program.
The MIDI RPN Pitch Bend Change message can be
received to control this and change the setting.
(However it will not be received if this parameter is set
to PRG.) This message is received on the MIDI channel
for each timbre set by MIDI Channel (Combi 3–1(2)c).
Timbre 02...08, 09...16 (Timbre Number):
These are the pitch‐related settings for timbres 2–8 and 9–16.
The settings are the same as for timbre 1. For more
information, please see "Timbre 01 (Timbre Number):"
above.
3–5(6): Menu Command
V
• 0: Write Combination see p. 101
• 1: Exclusive Solo see p. 64
• 2: Auto Song Setup see p. 65
• 3: Copy from Program see p. 101
• 4: Detune BPM Adjust see p. 103
For more information, please see "Combination: Menu
Command" on page 101.
3–7: Scale T01–08,
3–8: Scale T09–16
3–7a
3–7b
3–7c
Here, you can make settings for the scale of timbres 1–8 and
9–16.
3–7(8)a: Combination Name, Tempo
3–7(8)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 79.
3–7(8)c: Scale
Timbre 01 (Timbre Number):
Use Program's Scale
Timbre can use the scale that is specified by Scale (Prog 1–
2b).
On (checked): The scale specified by the program will be
used.
COMBI P3: Timbre Param (Timbre Parameters) 3–7: Scale T01–08, 3–8: Scale T09–16
[PRG, –24...+00...+24]
3–7
Menu
[Off, On]
Off (unchecked): The scale specified by Type (Combi's
Scale) (Combi 3–7(8)c) will be used.
Timbre 02...08, 09...16 (Timbre Number):
Here, you can make settings for the scale of each timbre 2–8
and 9–16. The settings are the same as for timbre 1. For more
information, please see "Timbre 01 (Timbre Number):"
above.
Scale:
This specifies the scale that the combination will use. For
more information, please see "1–2d: Scale" on page 15.
Type (Combi's Scale)
[Equal Temperament...User Octave Scale15]
Selects the scale.
Key
Selects the tonic key of the selected scale.
Random
As this value is increased, an increasingly random deviation
will be added to the pitch at each note‐on.
If Status (Combi 3–1(2)c) is INT, this setting will affect
the pitch produced by the KROME. If Status is EXT, this
setting will affect the note number of the note messages
transmitted via MIDI.
3–7(8): Menu Command
V
• 0: Write Combination see p. 101
• 1: Exclusive Solo see p. 64
• 2: Auto Song Setup see p. 65
• 3: Copy from Program see p. 101
For more information, please see "Combination: Menu
Command" on page 101.
[C...B]
[0...7]
83