188: L/C/R Long Delay; 189: St/Cross Long Delay (Stereo/Cross Long Delay) - Korg Krome Parameter Manual

a: Sw
This parameter determines how to switch on/off the
overdrive via a modulation source.
When Sw = Toggle, overdrive is turned on/off each time the
pedal or joystick is operated.
Overdrive will be switched on/off each time the value
of the modulation source exceeds 64.
When Sw = Moment, overdrive is applied only when you
press the pedal or operate the joystick.
Only when the value for the modulation source is 64 or
higher, the overdrive effect is applied.

188: L/C/R Long Delay

This multitap delay outputs three Tap signals to left, right
and center respectively. You can set a maximum of
5,460msec for the delay time.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
L Delay Time
0...5460
[msec]
a
Level 0...50
C Delay Time
0...5460
[msec]
b
Level 0...50
R Delay Time
0...5460
[msec]
c
Level 0...50
Feedback
–100...+100
(C Delay)
d Src Off...Tempo
Amt –100...+100
High Damp
0...100
[%]
e
Low Damp
0...100
[%]
Input Level
–100...+100
D-mod [%]
f
Src Off...Tempo
g Spread
0...50
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
h Src Off...Tempo
Amt –100...+100
334
Wet / Dry
L Delay
Level
C Delay
Spread
Level
Feedback
R Delay
Level
Wet / Dry
Sets the delay time of TapL
Sets the output level of TapL
Sets the delay time of TapC
Sets the output level of TapC
Sets the delay time of TapR
Sets the output level of TapR
Sets the feedback amount of
TapC
Selects the modulation source
for the TapC feedback
Sets the modulation amount of
the TapC feedback
Sets the damping amount in the
high range p.289
Sets the damping amount in the
low range p.289
Sets the modulation amount of
the input level p.284
Selects the modulation source
for the input level p.284
Sets the width of the stereo
image of the effect sound
p.289
Sets the balance between the
effect and the dry input
Selects a modulation source for
Wet/Dry
Sets the modulation amount for
Wet/Dry
189: St/Cross Long Delay
(Stereo/Cross Long Delay)
This is a stereo delay, and can by used as a cross‐feedback
delay effect in which the delay sounds cross over between
left and right by changing the feedback routing. You can set
a maximum of 2,730msec for the delay time.
Stereo In - Stereo Out
Left
High Damp
Delay
Input Level D-mod
Stereo/Cross
Feedback
High Damp Low Damp
Input Level D-mod
Delay
Right
Stereo, Cross Switches between stereo delay
a Stereo/Cross
and cross-feedback delay
L Delay Time Sets the delay time for the left
b 0.0...2730.0
[msec] channel
R Delay Time Sets the delay time for the right
c 0.0...2730.0
[msec] channel
Sets the feedback amount for
L Feedback –100...+100
the left channel
Selects the modulation source of
d Src Off...Tempo
feedback amount
Sets the modulation amount of
Amt –100...+100
the left channel feedback
Sets the feedback amount for
R Feedback –100...+100
the right channel
e
Sets the modulation amount of
Amt –100...+100
the right channel feedback
High Damp Sets the damping amount in the
f 0...100
[%] high range
Low Damp Sets the damping amount in the
g
0...100
[%] low range
Input Level Sets the modulation amount of
–100...+100
D-mod [%] the input level
h
Selects the modulation source
Src Off...Tempo
for the input level
Sets the width of the stereo
i Spread –50...+50 image of the effect sound
Dry, 1 : 99... Sets the balance between the
Wet/Dry
99 : 1, Wet effect and the dry input
Selects a modulation source for
j
Src Off...Tempo
Wet/Dry
Sets the modulation amount for
Amt –100...+100
Wet/Dry
Wet / Dry
Low Damp
Stereo/Cross Spread
Wet / Dry
p.289
p.289
p.284
p.284
p.289