Combination Mode; Combi Page Select - Korg Krome Parameter Manual

Hide thumbs Also See for Krome:
Table of Contents

Advertisement

COMBI Page Select

You can use the following ways to select the pages in

Combination mode.

1. Press the PAGE button to access "Page Select."
Alternatively, press the mode button on the upper left side
of the display, and then press the right side of the menu.
"Page Select" shows an abbreviated name for each page.
The page in which you were prior to pressing the PAGE
button is shown in light blue.
2. Select the desired page in the display.
Other ways to select pages
• Hold down the PAGE button and press a numeric keys,
0–9, to specify a page number; you will move to the
corresponding page.
For example if you want to access the P3: Timbre Param
page, hold down the PAGE button and press numeric
key 3.
• Pressing the EXIT button will take you to the P0: Play
page. If a page other than the Program T01–08 page is
selected, pressing the EXIT button will take you to the
Program T01–08 page.
Combination mode
Page
Select and play combinations. (see p.70)
Program selection for each timbre. (see
p.71)
P0: Play
Pan and volume settings etc. for each
timbre. (see p.73)
Simple arpeggiator editing. (see p.74)
Editing from the Tone Adjust (see p.75)
SW1, 2, and knob function settings. (see
P1: Controllers
p.78)
P2: EQ
EQ settings for each timbre. (see p.79)
Various parameter settings for each
P3: Timbre Param
timbre (MIDI channel, OSC selection,
Pitch setting, etc.) (see p.81)
Key split and layer settings.
(Key zone and velocity zone) (see p.84)
P4: Zone/Delay
Time delay from note‐on to beginning of
sound. (see p.86)
MIDI transmit/receive filter settings. (see
P5: MIDI Filter
p.87)
P7: Arpeggiator/
Arpeggiator settings. (see p.92)
Drum Track
Drum track settings. (see p.93)
Oscillator output bus and master effect
send level settings. (see p.95)
P8: Routing/IFX
Insert effect routing, selection, and
settings. (see p.97)
Master effect routing, selection, and
settings. (see p.99)
P9: MFX/TFX/
Total effect selection and settings. (see
LFO
p.100)
Common FX LFO settings (see p.100)
Main content
69

Advertisement

Table of Contents
loading

Table of Contents