6.3.1
ip-mac bind
Command Description
//This command is used to enable the ip-mac banding.
ip-mac bind enable
//This command is used to disable the ip-mac banding.
ip-mac bind disable
//This command is used to enacble IP - MAC banding on the interface.
ip-mac bind enable port interface-id
//This command is used to disable IP - MAC banding on the interface.
ip-mac bind disable port interface-id
//This command is used to add a ip-mac binding.
ip-mac bind add interface-id ip-addr mac-addr
//This command is used to delete a ip-mac binding.
ip-mac bind del ip-addr
Parameter
Parameter
interface-id
ip-addr
mac-addr
enable
disable
enable port
eisable port
add
del
Default
None
Command Mode
Global configuration mode
Example
//This command is used to open the IP - MAC binding.
switch(config)# ip-mac bind enable
//This command is used to open IP - MAC binding in G2 .
switch(config)# ip-mac bind enable port G2
// Add a ip-mac binding.
Parameters of the command mode
The physical port of the MAC address.
Ip address
MAC address
Global switch on
Global switch off
Port opening
Port shutdown
adjunction
delete