Table of Contents
Advertisement
4.10.6
scheduler policy
Command Description
scheduler police
//Set Qos scheduling algorithm.
Parameter
sp
wrr
Default
sp
Command Mode
Global configuration mode
Example
switch(config)# scheduler policy wrr 1 2 3 4 5 6 7 8
4.10.7
example
Test topology map (test is based on the QoS of ports)
The 1-3 port of the Ixia tester corresponds to the G18-G22 of the switch.
（一）Configuration
// When the data packets in the port is not marked with any priority, the priority of
the port is set to the corresponding queue.
a、Set the packets which enter the 18 port are marked with priority 7 and set
the packets which enter the 20 port are marked with priority 6.
switch(config)#interface G18
switch(config-G18)cos default 7
switch(config-G18)no qos trust
switch(config-G18)exit
Strict priority mode: First in the queue with the highest priority
service, until the priority is empty and service for the next high
priority queue, and so on.
Weighted round robin scheduling algorithm: To support different
bandwidth requirements, it can allocate different proportion of
output bandwidth for different queues.
Hide quick links:
Advertisement
Table of Contents
