Dot1X Acct-Sever; Dot1X Timer - Dahua DH-PFS6428-24T Cli Configuration Manual

Command Mode
Global configuration mode
Example
switch(config)#dot1x auth-server-type local
switch(config)#dot1x auth-server-type remote
6.5.4

dot1x acct-sever

Command Description
dot1x acct-sever ip A.B.C.D secondary-ip A.B.C.D port<PORT>
shared-secret< SECRET >
//Configure the billing server IP address and the standby server IP address and
secret key.
Parameter
Parameter
A.B.C.D
secondary-ip
Default
Remote
Command Mode
Global configuration mode
Example
s
witch(config)# dot1x acct-sever ip 127.0.0.2 secondary-ip 127.0.0.3 port
1812 shared-secret 123
6.5.5

dot1x timer

Command Description
dot1x timer reauth-period/quient-period value <1-65535>
//Configure authentication server update interval /hold authentication time.
Parameter
Parameter
value
reauth-period
quient-period
Default
This command is to reauth-period is 3600s
Parameters of the command mode.
IP address .
The standby server ip address.
Parameters of the command mode
Unit: second, range: 1-65535, aging update time
Authentication update interval time
Quiet period update interval