Vrrp Ip; Vrrp Preempt - Dahua DH-PFS6428-24T Cli Configuration Manual

None
Command Mode
Interface configuration mode
Example
//Modify notification time of group1 is 5 seconds.
switch(config)# interface vlanif1
switch(config-vlanif1)# vrrp 1 advertisement 5
4.11.2

vrrp ip

Command Description
vrrp<group> ip A.B.C.D
//This command is to set up virtual routing IP address.
Parameter
None
Default
None
Command Mode
Interface configuration mode
Example
//This command is to set up virtual IP as 192.168.1.254.
switch(config)#interface vlanif1
switch(config-vlanif1)# vrrp 1 ip 192.168.1.254
4.11.3

vrrp preempt

Command Description
vrrp<group> preempt
//This command is VRRP preemption mode.
no vrrp<group> preempt
//This command is disabled VRRP preemption mode.
Parameter
None
Default
Enable
Command Mode
Interface configuration mode
Example
//This command is disabled VRRP preemption mode.